What You Can and Can't Chip with Your Wood Chipper

Hey Keyul Enterprise customers! Got a yard full of branches and our Wood Chipper is at your side? You're ready to turn those woody leftovers into landscaping magic! But before you start feeding everything in sight into the machine, let's break down what your chipper can handle and what's best left untouched. Let’s explore with us- one of the preeminent Wood Chipper Manufacturers in Mumbai:

What A Wood Chipper Machine Chips:

• Branches & Limbs: This is what wood chipper machines were made for! Most models at us can tackle branches up to a certain diameter. Aim for branches that are manageably thick and not too gnarled or twisted.
• Brush & Twigs: Got a pile of brush after clearing some land? Your chipper can turn it into useful wood chips in a flash. Just make sure there aren't any hidden rocks or debris mixed in that could damage the blades.
• Shrub trimmings: Gave your hedges a haircut? Don't just toss those clippings in the bin! Feed them into your chipper for fantastic mulch that will nourish your flowerbeds.
• Softwood Scraps: Have leftover lumber scraps from a project? Softwoods like pine or spruce can be chipped in moderation by some of our chippers. Check your manual for recommendations on size and quantity.

What Not to Chip:

While wood sawdust machines or wood chippers are tough machines, some materials can cause trouble:

• Hardwood Scraps: Dense hardwoods like oak or maple can be too tough for some chippers, potentially damaging the blades. It's best to stick to softer woods or dispose of these scraps elsewhere.
• Grass & Leaves: While a stray leaf or two won't hurt, large amounts of wet grass or leaves can clog up your chipper. These materials are better suited for composting.
• Rocks & Dirt: This should be a no-brainer, but throwing anything other than organic materials into your chipper is a recipe for disaster. Rocks will damage the blades, and dirt will clog things up.
• Metal & Plastic: Again, this can seriously damage your chipper. Keep an eye out for any hidden wires, nails, or other debris in your branches before chipping.
• Poison Ivy & Other Toxins: Chipping poison ivy can spread the oil, causing an itchy rash. It's best to remove this material carefully and dispose of it properly.

Bonus Tips for Chipping Success

• Safety First! Always wear safety glasses, gloves, and sturdy footwear when operating your chipper.
• Keep it Sharp: Blunt blades are less efficient and more prone to breaking. Refer to your manual for instructions on sharpening or replacing chipper and cattle feed making machine blades.
• Size Matters: Don't try to force branches that are too thick for your chipper. It can damage the machine and could be dangerous.
• Feed it Right: Gradually feed branches into the chipper, not in big clumps. This will help prevent jams and keep things running smoothly.

Buy From the Top Wood Chipper Manufacturer in India!

By following these tips, you'll get the most out of your wood chipper and turn yard waste into valuable mulch for your landscaping projects. Remember, if you're unsure about anything, consult your chipper's manual or reach out to the friendly staff at us- one of the best Chipper and Wood Sawdust Machine Manufacturers in India, for expert advice. Shop the best quality today!